Dodge Ram FIRST EVER Hydro Pneumatic Bump Assist Package

The front bump kit contact plate mounts under the frame near the coil buckets. This requires a minor amount of cutting and welding. The bump stop mounts utilize a control arm bolt and an existing hole for a brake line bracket. A small weld is placed to the bottom of the mount to the lower control arm mount for strength. Normal installation time is about 2 hours.

The front kit will work with any shock and any suspension system that is based upon the factory suspension geometry. You can use these in concert with all of Sage's packages. Suggested for moderate to heavy off road use.

As pictured the rear bump stop kit includes a 1.5 .120 wall chromoly cross member with integrated 7/8 chromoly rod ends. This keeps the frame rails from rolling in towards each other, however the bearings allow normal chassis flex. This design won t stress the brackets and does not apply rigidity to the frame which could cause cracking.

This is a 100% BOLT ON system. Installs in about 30 minutes.

Bumpstops can be utilized in conjunction with any of Carli's suspensions systems, or even stock applications.